Everything you need to know for proper maintenance of indoor water fountains.

fuente de agua de interior

In one of our previous posts, we talked about the advantages of installing an indoor water fountain in the office (click HERE to access the full article). The benefits of staying hydrated are innumerable. Having quality water within reach always helps to increase the well-being and comfort of employees in their workplaces.

According to the WHO, it is advisable to drink between 1.5L and 2L of water per day, especially during the hottest periods.

In fact, the installation of an indoor water fountain is not only recommended in offices and workplaces, but in any type of space such as schools, hospitals, hotels, shopping malls and so on. New technologies and advances in terms of design have allowed the development of increasingly compact and smaller models, so that they can be installed in spaces of any size.

However, all the benefits provided by their installation in terms of hydration and health can be affected without proper maintenance. In this article we will explain everything you need to know about indoor water fountains; and above all how to perform a correct maintenance to keep the water as clean as possible.

 

 

What types of indoor water fountains are there?

 

There are two main types of indoor water fountains: those that are connected to the drinking water outlet and those that are supplied by bottles.

The former has many advantages over the latter. In fact, the indoor fountain connected to the mains becomes an inexhaustible source of water. Equipped with filters, it purifies the water by retaining particles such as limestone and chemicals such as chlorine. It is also the most sustainable alternative because it does not require a continuous supply of plastic bottles. At the same time, it solves the storage problem posed by the bottles in question. Finally, once installed, there are no additional costs.

The Brita filtering company details in this interesting article that we encourage you to consult the cost of plastic bottles at an economic, resource and environmental level.

For example, they explain how filtered water bottles “facilitate access to water, use fewer natural resources and save on transportation costs. In short, their ecological impact is lower, and the health of the planet is a winner. In 2017 alone, BRITA filtered water avoided the emission of 300,000 tons of CO2. The equivalent of the annual CO2 emissions of 150,000 cars!”

In short, for very little effort both financially, in terms of resources and time, installing an indoor water fountain connected to the mains brings us a multitude of benefits both on a personal level and in terms of environmental sustainability.

 

 

How are indoor water fountains cleaned?

 

 

The maintenance required to ensure a good quality of the water supplied by the fountain is simple, but it must be regular to preserve people’s health. Here is a series of instructions that can be given after the installation of an indoor water fountain or applied if you already have one in your space.

First of all, we would like to point out that each model is different, and the maintenance must be suitable for the model installed. We advise you to check the manufacturer’s advice to provide the relevant maintenance explanations. However, we would like to share with you some common tips for all indoor water fountains.

 

Fuente de agua de interior

Exterior cleaning of water fountains

 

Before maintenance, indoor water fountains should always be disconnected from the power supply for safety reasons. It is an electrical appliance, so it is best to take precautions before handling it and putting it in contact with water or other products.

 

 

How often should they be washed?

 

Your exterior should be cleaned daily. This is the quickest and simplest maintenance, but not the least important. It is enough to remove the dirt with hot water as a disinfection and to remove the accumulated dust and dirt. It is important to clean the entire fountain, without forgetting the rear part for which we can use a brush. With this simple step we ensure both to maintain proper hygiene for the day to day and to prevent the deterioration of the indoor water fountain.

In the same way, we must not forget the faucet. In fact, it is the most important piece as it is the main conduit through which water flows continuously. It is usually necessary to remove it in order to clean it properly. Nor should we forget about parts such as threads or drains.

 

 

 

What products should be used for its correct maintenance?

 

The most important point to consider is to avoid aggressive or corrosive chemical products. We must not forget that this is the surface that will be in contact with the water that we will end up consuming, so it would not be appropriate to mix it with this type of products.

For this reason, for daily maintenance it is best to use a damp cloth with hot water and soap, this being the most effective way to clean without any risk to health.

 

 

Interior cleaning of water fountains

 

It is of vital importance not to overlook the interior cleaning of the water fountains since it is a fundamental step for its proper maintenance. It is advisable to perform this step approximately every six months. However, it is necessary to verify this information directly with the manufacturer as in some cases it may change.  This is a thorough process that usually requires the intervention of a qualified technician, or the use of a cleaning kit sent specifically for each model.

 

 

The importance of filters in water fountains

 

There are several methods of filtering indoor water fountains on the market. They are of vital importance since they are the part that will guarantee the good quality of the water and the guarantee of a totally purified water. Filters contribute to the elimination of bacteria, toxic residues, chemicals, etc. that can endanger people’s health.

Some filtering systems not only remove impurities from the water, but also improve its minerals.

We recommend the use of so-called “natural” filters, specifically those that are not made of plastic, and in particular an activated carbon purifying filter, as this will ensure that the water is in optimum condition and free of bad tastes and odors.

 

fuente de agua de interior

 

Tips for good use of indoor water fountains

 

  1. Location: two main factors should be considered. Firstly, it should be in a central location with a high traffic flow so that the employees of the office or other spaces can reach it easily and quickly. Secondly, we must be careful to place it on a flat surface.

 

  1. Protection: it is recommended to use a rubber mat under the indoor water fountain to protect the floor surface.

 

  1. Safety: as mentioned in the previous point, it is of vital importance to unplug the appliance before handling it for maintenance. In case of handling hot water dispensers, it is necessary to wait until they are completely cold.

 

  1. Tanks: it is recommended to store them in cool places, out of sunlight and away from chemical products.

 

 

Summary of maintenance of indoor water fountains

 

  1. For daily cleaning: avoid the use of chemical products. Use lukewarm water or antibacterial cleaning wipes.

 

  1. For weekly cleaning: use warm water and mild soap

 

  1. For monthly or every 6 weeks cleaning: a thorough cleaning is recommended, disassembling the fountain, and washing its parts separately. Use water and bleach to clean the tanks, trays, faucets, etc.

 

  1. For annual cleaning: it will be done with the intervention of a specialized technician by the manufacturer or with the cleaning kit supplied during the sales process.

 

Our Recommendation

fuente de agua de interior

Simex indoor water fountain ref 09016.

 

Simex indoor fountains are made of stainless steel with glossy finish, a resistant and durable material. They are fountains with gooseneck, manual spout, internal thermostat, and temperature regulator. They have a cooling capacity of 25l/h and can cool between 6ºC and 10ºC.

These indoor fountains not only have a carbon filter – a natural filter that helps to purify the water – but also a particle filter.

The particle filter acts as a net to retain the smallest microparticles and ensure unbeatable water quality.

In addition, model 09016 features a foot pedal for touch-free activation of the fountain to ensure maximum hygiene during use.

 

 

All our drinking fountains are CE certified, water potability certified and RoHs certified.

Simex cares about sustainability, efficiency, and hygiene by offering models prepared to guarantee water’s quality and safety for people. Discover HERE the Simex indoor fountains.